Important Notice!! FREE Vapor Smoothing Post - Process for all Nylon 6/11/12, TPU, ABS, ASA (SLS, MJF&FDM) Order(s). From 12th Aug- 30th Sep'22.
AlSi10Mg contains 0.6% of Mg and 10% of Si. The high percentage of silicon gives good casting characteristics. It has relatively high electrical conductivity, a moderately high melting temperature, and relatively high tensile strength. It's often used for aeronautics (wings and armaments), in the automotive industry (bumpers and engine blocks), and in marine (hull and accessories). Such aluminum alloys are widely used in engineering structures and components where lightweight and corrosion resistance is required. Its composition makes it suitable for moulding, but it's more widely used for 3D printing using DMLS and SLM technology.
Standard: The standard finish refers to the removal of any support structures. The surface of the part is also medium blasted to create a uniform appearance.
CNC Machining or Polishing: In some cases, CNC machining or polishing can be specified for specific features on the component. However, these are evaluated on a case-by-case basis.
High strength-to-density ratio;
Good conductor of electricity;
Recyclable without quality loss;
Can be anodized;
Withstands low temperatures;
Low yield strength;
More expensive than some other basic metals.
Download ALUMINUM Alsi 10Mg Datasheet Here
Quick-turn prototyping and short production runs for all industries.
Upload a CAD file for an instant quote.